KNV-NVAC-126 PVS-14 Dual Mount Adapter, Dovetail

KNV-NVAC-128 PVS-14 Dual Mount Adapter, Wilcox Interface

Combines 2 PVS-14 Monoculars together to create a Binocular.

5009737 (Light Interference Filter) Federal Govt Only
NSN: 5855-01-379-1410
Prevents IR Pointing & Aiming LASER's from damaging the NVG's. Screws into the objective lens and can be used with all other accessories. The 3X and 5X Magnifiers can be attached using Slip-On Adapters.

56400G04 Threaded Protective Objective Lens Cover

The Wilcox Protective Cover for the AN/PVS-14 Front Objective Lens is a unique cost effective ring assembly that fastens to the interior threaded diameter of the AN/PVS-14 NVG, providing an anti-reflective and scratch resistant protective cover to the front objective lens. The cover securely covers the entire NVG lens and features an O-ring that prevent moisture from building up on the lens. A threaded interface separates allowing for the easy replacement of lens inserts extending the life of the NVG.
 

A3256347 Swing Arm or "J-Bar"

NSN: 5965-01-444-1216
Head Mount & Helmet Mount Adapter. Attaches to the NVG and interfaces w/the Head Mount/Helmet Mount.

Wilcox Skull Lock Head Mount

     The Skull Lock Head Mount features Team Wendy Cam Fit Suspension System along with Wilcox Breakaway feature. This allows the mount to break away from the head mount under a stressed conditions or the operator can choose to lock the mount into place when the breakaway mode is not required. The Skull Lock Head Mount fully integrates with the complete L4 line of NVG Mounts. The system offers seven points of quick adjustment points  Read More...

A3144268 Headmount & Browpads
NSN: 5855-01-246-8266
Allows you to wear your NVG comfortably on your head. Chin strap can be adjusted with 4 different cinch straps and comes w/Small, Medium, and Large Brow Pads for optimal fit.
A3144280 (3) Browpads, Small 5855-01-355-8599
A3144435 (3) Browpads, Medium 5855-01-355-8600
A3144436 (3) Browpads, Large 5855-01-297-7847

26300G02 Wilcox PVS-14 Arm w/NVG Interface w/ON/OFF Switch

The Wilcox AN/PVS-14 Arm with NVG Interface Shoe provides a durable connection for mounting an AN/PVS–14 Goggle to a Wilcox Combat Helmet Interface Mount. This version of the PVS-14 Arm features a one-handed, On/Off push button that the operator can easily access without the need of taking the NVG off the mount or helmet. It can be easily mounted and dismounted from the AN/PVS-14 goggle by means of a thumb screw, and allows the operator to select the height and angle for comfort with the ability to make fine adjustments to the Arm to customize the position of the Night Vision Goggle for proper eye position and relief.

A3187392 Soft Carry/Storage Case, Military, OD Green
NSN: 5855-01-246-8269 or 5855-01-398-4284

A3256391 MILSPEC 3X Magnifier f/1.5, FOV:13 Degrees
NSN: 5855-01-461-2741 or 5855-01-423-0817

NVAC-107-3X Commercial 3X Lens f/1.5, FOV:13 Degrees
Commercial variant of the A3256391 3X Magnifier

275095 MILSPEC 5X Magnifier f/2.4, FOV:7.7 Degrees
NSN: 5855-01-391-7026 or 5855-01-511-8594

NVAC-110-5X Commercial 5X Lens f/2.4, FOV:7.7 Degrees
Commercial variant of the 275095 5X Magnifier

DLOC-P14 Quick-Disconnect Weapons Mount 
Allows the Swing Arm Assembly and the DLOC-P14 to remain attached without wasting time switching them. Left or Right Hand Operation can be achieved simply by turning the locking ring 180 Degrees on the base. Aligns perfectly with the Aimpoint (ARMS#22 w/Spacer) or EOTech Holographic Sights. 1.65" (42mm) off Cenetrline

M69-PRI-PVS14 Picatinny Weapons Mount Adapter (adj. height)
Available for the AN/PVS-14 and Litton 983. Locators prevent slippage Horizontally and Vertically during firing and a Calibrated Scale assists the user in returning the carrier to a favored sweet spot. Two Thumb Screws with Integral Self-Locking System and slots for easy removal. Only the toughest State-of-the-Art coatings and Solid Stainless Steel parts with Non-Reflective Matte Finishes are used to prevent rust and corrosion. Positive locating surfaces hold and locate the PVS-14. Quick Detachable Patented A.R.M.S. Throw Lever Mounting System with Guaranteed On and Off repeatability. NSN# 5855-01-482-6164

(Click images to enlarge)

NVAC-109 PVS-14 Weapon Mount, for Aimpoint Twist Mount
NVAC-115 PVS-14 Weapon Mount, for Aimpoint Twist Mount, Back-up Iron Sight

Enables users to switch between the Aimpoint 3XMag or Concealed Engagement Unit (CEU) and the AN/PVS-14 night vision monocular with no tools required. This Adapter allows for the AN/PVS-14 night vision monocular (or compatible) to snap on directly to the Aimpoint TwistMount™ Base in place of the 3X Mag or CEU. The KNV-NVAC-109 correctly aligns AN/PVS-14 with the Aimpoint® night vision compatible sights (Comp-series) when sights are mounted in the Aimpoint QRP Ring with Spacer. The adapters will also co-align the AN/PVS-14 with most night vision compatible EOTech sights when they are mounted directly to the upper receiver.
Latest PVS-14 mount converts to a magnifier mount with the push of a button.
Works for both Aimpoint and EOTech magnifiers. The Quick Flip feature is functional for all three devices. PVS mount price includes the price for either the Aimpoint or EOTech magnifier mount. Specify magnifier when ordering:

A3256348 Fixed Height Weapons Mount
NSN: 5340-01-446-8588