***Call Today - Ship Today - Free S&H***
 

9001 (Black)

9002 (Tan)

To Order by Phone, please call:
(702) 324-6463 or email sales@nitevis.com

Supplied with:
Quick Release HT Mount, Battery, (1) 3-Volt 123A Lithium Battery, 7" Right Angle Remote Cable Pressure Pad Switch (Specify cable length if different from standard)
      *  Integrated Momentary Remote Pressure Pad Switch & Activation Switch
      *  Single-Tap - Enables momentary activation
      *  Double-Tap - Instantly activates the LASER in a 5 Minute continuous "ON Mode".
      *  Built-in safety returns the unit to momentary activation after 5 minutes.
      *  The Pressure Pad provides a tactile (silent) click that indicates when the switch has been activated

     The DBAL-D² is the commercial version of its predecessor, the DBAL-A². The DBAL-D² is equipped with a visible laser pointer, Class 1 IR laser pointer, and a high definition, aspherical, telescopic IR LED illuminator that outperforms all other IR illumination devices.

The DBAL-D² feature a new streamlined housing, improved Windage and Elevation adjusters and a single activation switch. Frequently compared to the plastic-molded AN/PEQ-15, the DBAL-D² delivers superior operational longevity due to its all metal housing and mounting system.

  *  Rugged aerospace aluminum housing
  *  MIL-SPEC Type III Hardcoat anodized
  *  Instantly switch between LASER functions:
  *  Visible Pointer only * IR Pointer only * IR Illuminator only
  *  Infrared Pointer & Infrared Illuminator combined
  *  Co-Aligned Visible & IR Aiming LASER\\\'s
  *  Single adjustment mechanism for both IR & Visible LASER\\\'s
  *  Hi-Power & Lo-Power (Class I) modes of operation
  *  2 Degrees to 30 Degrees adjustable IR Illuminator
  *  Fully adjustable for Windage & Elevation for Pin-Point Accuracy
  *  Collimated IR illuminator significantly enhances Night Vision performance (Gen I acts like Gen II)
  *  Activation and Low Battery Indicator Light
  *  Meets MIL-STD-810F for adverse environmental conditions
  *  Mounts on all MIL-SPEC-1913 rails
  *  Positive On/Off Kill Switch prevents accidental activation
  *  Precision glass lens produces a virtually round laser point
  *  Waterproof to 20 Meters

EXPORT LICENSE REQUIRED.

SYSTEM DESCRIPTION

     The DBAL-D² is a Class IIIa laser device that features a Visible Pointer for daylight and low light operations, as well as an Infrared Pointer and Infrared Illuminator for use with Night Vision Devices. The IR beams can be operated individually or in combination, in both low power (LO PWR) and high power (HI PWR) settings.
     The DBAL-D² emits a highly collimated beam of IR light for precise aiming of the weapon and a separate IR Illuminator for the target or target area. The IR Illuminator is equipped with an adjustable bezel to vary the size of the illumination beam based on the size and distance to the target. The Visible Pointer and the IR Pointer are co-aligned. The Visible Pointer can be used to boresight the device without the requirement of a Night Vision Device and will simultaneously boresight the IR Pointer.
     The DBAL-D² can be used as either a handheld illuminator/pointer or it can be weapon mounted using the Throw Lever Mount. In the weapon mounted mode, it can be used to accurately direct fire as well as illuminate and identify targets.
     When the Safety Screw is installed in the rear of the DBAL-D² housing, it prevents the operator from accessing the, HI PWR modes of operation.

    DBAL-D² Item Description

1) Battery Cap and Compartment

2) Infrared Illuminator

3) Throw Lever Mount

4) Visible Pointer

5) Boresight Adjusters

6) Infrared Pointer