P/N: 902801
Poseidon Clip Mounts
P/N: 902801-BLK (Black)
P/N: 902801-TAN (Sand) NSN: 5340-01-598-4800
P/N: 902801-ODG (Olive Drab-Green)
 

Poseidon Clip Mount Features:

                  Works with Phoenix & Pegasus Beacons

                  Provides a watertight seal for up to 46m or 150'

                  Convenient mounting clip for web belts

                  Holes for Optional Vehicle Power Supply

                  Available in Tan, Black or OD Green

                  Weighs 58 grams (2.05oz)

The Poseidon™ Clip Mount (902801) provides both a watertight and durable mounting system for the complete Phoenix and Pegasus series of Infrared beacons. All deployed versions of Phoenix and Pegasus can use the Poseidon Clip Mount.

     The mounting clip can be attached to PALS webbing, belts, or uniform by using the supplied locking spring clips. It can also be secured with bolts to rigid surfaces such as helmets and vehicles.

     The beacon is attached to the battery and placed within the Poseidon Clip Mount. The clear top cover is placed over the beacon and secured using the dual locking flanges forming a watertight seal . The clear top cover allows for 360 degree visibility of the beacon. An included shield cap can be snapped in place over the top cover to focus the signal emission to front and top only, giving the operator the choice of directing the signal emission.

SPECIFICATIONS
Weight w/Shield & Clips: 1.8 Ounces | 51 Grams
Size: 2.75” x 2.1” x 1.25" | 70mm x 53mm x 35mm
Capacity: 46 Meters / 150 Feet
Tested: (1) Phoenix or Pegasus Series Beacon + 9-Volt Battery
Viewing Angle: 360° Horizontal / 240° Vertical without the shield cap fitted. The shield cap substantially reduces the viewing angle and limits signal transmission to top and front only
Included Items: Poseidon Clip Mount, Directional Cover, Two locking spring clips , Zip Tie (not pictured)

Operating depth: The Poseidon — Phoenix / Pegasus Mounting Clip (902801) provides a water tight casing for the beacon and battery assembly. If immersed without the Poseidon case, the unit will continue to operate until the contacts fail due to water and electrolytic corrosion. Given these conditions the depth limitation is solely determined by the battery’s ability to withstand depth.

Ordering Information:
KNV-902801B: Poseidon Mount Clip, Black
KNV-902801G: Poseidon Mount Clip, OD Green
KNV-902801S: Poseidon Mount Clip, Desert Sand NSN: 5340-01-598-4800

These Mounting Clips are proudly manufactured in the USA

 EXPORT LICENSE REQUIRED.
Infrared Beacons are ITAR Controlled and cannot be exported without written authorization from the US State Department