A little goes a long way. Whether you are shooting against the clock, kicking in a door or tracking that shot of a lifetime, more detail without the hassle of sensitive movement from high magnification is exactly what the SR-6S delivers. The JNG MIL reticle is ideal for fast and accurate shot placement throughout the magnification range. The SR-6S facilitates a clear and comfortable sight picture for long days on the range and in the field while making target acquisition quick and easy. Featuring a 1.5-6X magnification range through a generous field of view, the SR-6S is ideal for engaging targets at distances from point blank out to 600+ yards. An illuminated JNG MIL reticle facilitates quick center-mass target acquisition in any lighting condition via the outer ring and .5 MIL hash marks on the stadia lines.

Optional finish colors available at an additional charge. Scope body, eye piece, objective housing and any and all other body parts are made with 6061-T6 aircraft aluminum and are then coated with a matte black type III hard anodizing. Dual elevation and windage rebound springs will insure decades of reliable and accurate adjustments.

Matte Black type III is the hardest scope coating in the industry it is scratch proof and chemical proof. This coating can with stand severe abuse, salt fog tests have been conducted internally and externally by outside military testing. Sulfuric acid is the most widely used solution to produce anodized coating, while coatings thicker than 25 μm (0.001") are known as Type III, hardcoat, hard anodizing, or engineered anodizing. Standards for thick sulfuric anodizing are given by MIL-A-8625 Type III, AMS 2469, BS 5599, BS EN 2536 and the obsolete AMS 2468 and DEF STAN 03-26/1.The Matte Black finish is matte black dye.

     (Buy This Separately)

Rings and Mounts Accessory

Rings 30mm Low 0.990"

The 30mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights                                                                               

+$215.00

Rings 30mm X-Low 0.880"

The 30mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights                                                                               

+$215.00

Rings 30mm High 1.250"

The 30mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights                                                                                    

+$215.00

Rings 30mm Medium 1.100"

The 30mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights                                                                                           

+$215.00

Rings 30mm X-High 1.350

The 30mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights

+$215.00

Rings 34mm X-High 1.515"

The 35mm rings are made from a solid billet of 6061-T6 aluminum and then coated with a Type III hard black anodizing. These rings are windage adjustable to allow the user to use the maximum amount of the scopes travel. Rings are available in 5 different heights.

+$270.00

Unlike other scope companies, U.S. Optics allows the customer to customize their scope down to even the color. Whether it is a different color Type III Hard Anodize, or a Cerakote color, we can match the look of your rifle/gear on the scope. Because we are building all the scopes in house, we don't need to mask off the crucial parts, we coat each part before the scope is assembled for a high quality job.

Matte Black type III is the hardest scope coating in the industry it is scratch proof and chemical proof. This coating can with stand severe abuse, salt fog tests have been conducted internally and externally by outside military testing. Sulfuric acid is the most widely used solution to produce anodized coating, while coatings thicker than 25 μm (0.001") are known as Type III, hardcoat, hard anodizing, or engineered anodizing. Standards for thick sulfuric anodizing are given by MIL-A-8625 Type III, AMS 2469, BS 5599, BS EN 2536 and the obsolete AMS 2468 and DEF STAN 03-26/1.The Matte Black finish is matte black dye.

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

One of the most important parts of a rifle scope is the objective. The objective determines many qualities of the complete optical system. Magnification, exit pupil and light gathering are some of the most critical points. The larger the objective diameter, the more light will be gathered into the optical system. The smaller the objective, the smaller the exit pupil, and the longer the objective, the more magnification is gained.

Your reticle decision is one that will aid in many points of your scope. If you are choosing MIL, MOA or IPHY we have a reticle for you. Various reticle models have different ranging stadia, line thicknesses and design to aid the operator in hold off's, ranging and fine precision shot placement. If you don't see a reticle that suits your needs, contact us and we can design and build one exactly the way you want it.

Elevation knobs are one part of a scope that gets used a lot and having a repeatable, durable knob will provide many years of use. Whether you are using the EREK, #1 or #3, all knobs are made of stainless on stainless, or stainless on brass. Each knob is hand lapped to insure exact repeatability and accuracy. All knobs use an encapsulated tungsten ball with a stainless threaded housing so our technicians can adjust the tension for the perfect feel.

Our rapid focus eyepiece makes adjusting for diopter a quick and simple task. Unlike other scopes, the eyepiece housing stays in place while rotating the eyepiece itself.

Your weapon doesn't have to be lonely and incapacitated during the extremes.  Accessorize it with our custom covers, bags and other great items.

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net